loader image
Self-Operated Pressure Regulator for Steam gallery image 1
Self-Operated Pressure Regulator for Steam gallery image 1

Self-Operated Pressure Regulator for Steam

Valve

Type 2412

Pressure Rating

Class

125,150 or 300

PN

16,25 or 40

Nominal Size

NPS

½ to 2

2½ and 3

4

DN

15 to 50

65 to 80

100

Max.perm.diff.pressure ?p

Psi

360

290

230

Bar

25

20

16

Temperature Ranges

Refer to T 2500 EN for pressure-temperature diagram

Valve Plug

Metal seal: max. 660 °F (350 °C) · PTFE soft seal: max. 430 °F (220 °C)

EPDM, FPM soft seal: max. 300 °F (150 °C) · NBR soft seal: max. 175°F (80 °C) 1)

Leakage rate acc. To ANSI/FCI 70-2

Metal seal: Leakage rate I (≤ 0.05 % of CV/KVS)

Soft seal: Leakage rate IV (≤ 0.01 % of CV/KVS)

Actuator with Diaphragms

Type 2413

Set Point Ranges

0.75 to 3.5 psi · 1.5 to 8.5 psi · 3 to 17 psi · 10 to 35 psi

30 to 75 psi · 65 to 145 psi · 115 to 230 psi

0.05 to 0.25 bar · 0.1 to 0.6 bar · 0.2 to 1.2 bar · 0.8 to 2.5 bar

2 to 5 bar · 4.5 to 10 bar · 8 to 16 bar

Max. perm. temperature

Gases 660 °F (350 °C), however, max. 175 °F (80 °C) at the actuator 1) · Liquids 300 °F (150 °C), with

condensation chamber max. 660 °F (350 °C) · Steam with condensation chamber max. 660 °F (350 °C)

Actuator with Bellows

Type 2413

Effective area

5.1 sq.in (33 cm²)                                      9.6 sq.in (62 cm²)

Set Point Ranges

150 to 320 psi (10 to 22 bar)                               30 to 85 psi (2 to 6 bar)

300 to 400 psi (20 to 28 bar)                                   75 to 150 psi (5 to 10 bar)

Max. 140 °F (60 °C) for oxygen

Low-maintenance proportional regulator requiring no auxiliary energy
Frictionless plug stem seal with stainless steel bellows
Control line kit available for tapping the pressure directly at the valve body
Wide set point range and easy set point adjustment over a nut
Exchangeable actuator and positioning springs
Spring-loaded, single-seated valve with upstream and downstream pressure balancing 1) by a stainless steel bellows

Soft-seated plug for better shut-off performance
Low-noise standard plug · Special version with a flow divider St I or St III (NPS 1½ to 4/DN 65 to 100) for further
noise level reduction (see Data Sheet T 8081 EN)
All wetted parts are free of non-ferrous metal